AND UA-1020 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Tensiómetro AND UA-1020. AND UA-1020 20 páginas.
También para AND UA-1020: Tarjeta de inicio rápido (2 páginas)

Imprimir página

Adjusting the Built-in Clock

Adjust the clock prior to use.

1. Press the SET button until the year starts

blinking.

2. Select the year using the

Press the SET button to set the current year

and move to month/day selection. The date

can be set anywhere between the years 2010

and 2059.

3. Select the month using the

Press the SET button to set the current

month and move to day selection.

4. Select the day using the

Press the SET button to set the current day

and move to hour/minute selection.

5. Select the hour using the

Press the SET button to set the current hour

and move to minute selection.

6. Select the minute using the

(Press the SET button to go to the pressure

setting mode. For details, refer to page 11.)

Press the START button to turn the device off.

Note: After three minutes of non-operation, the device

will turn off automatically.

When the clock has not been

set, the clock display indicates

dashes as shown to the right.

Holding down the

will change the value continuously.

Selecting the Correct Cuff Size

Using the correct cuff size is important for an accurate reading. If the cuff is not

the proper size, the reading may yield an incorrect blood pressure value.

The arm size is printed on each cuff.

The arm cuff is a consumable. If it becomes worn, purchase a new one.

Arm Size

31 cm to 45 cm

17 cm to 32 cm

Arm size: The circumference of the biceps.

Using the Monitor

button.

button

Recommended Cuff Size

Large adult cuff

Adult cuff

English 8

button.

Pressing the START

button will turn the

device off anytime.

UA-CUFFBKLA-EC

UA-CUFGBKAU-EC

Press

Year

Month

Day

Hour

Minute

Turn off

Pressure

setting mode

Catalog Number