AND UA-767 Plus BT Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Tensiómetro AND UA-767 Plus BT. AND UA-767 Plus BT 17 páginas.

Slide the battery cover up to open it.

Remove the used batteries and insert

new batteries into the battery

compartment as shown, taking care that

the polarities (+) and (-) are correct.

Slide the battery cover down to close.

Use only R6P, AA batteries.

CAUTION

Insert the batteries as shown in the battery compartment. If not, the

device will not work.

When

(LOW BATTERY mark) blinks in the display, replace all batteries

with new ones. Do not mix old and new batteries. It may shorten the

battery life, or cause the device to malfunction.

(LOW BATTERY mark) does not appear when the batteries are drained.

Battery life varies with the ambient temperature and may be shorter at

low temperatures.

Remove the batteries if the device is not to be used for a long time.

The batteries may leak and cause a malfunction.

Use the specified batteries only. The batteries provided with the device

are for testing monitor performance and may have a limited life.

Insert the air connector plug

into the air socket firmly.

Insert the AC adapter plug into the

DC jack.

Next, connect the AC adapter to

an electrical outlet.

Use the specified AC adapter.

(Refer to page 15.)

Using the Monitor

Air Connector Plug

English 6

Step 1

Step 3

Air Socket

DC jack

AC adapter plug

Step 2

Air Hose