Athlon TSP1 Manual del usuario / Instrucciones de cuidado - Página 3

Navegue en línea o descargue pdf Manual del usuario / Instrucciones de cuidado para Visor Athlon TSP1. Athlon TSP1 9 páginas. Prism scope

A) FOCUSING THE SCOPE

The purpose of the Fast Focus eyepiece is to focus

the reticle in the scope to your eyes. For a fast focus

eyepiece, just simply rotate the fast focus ring at the

end of the eyepiece in either direction to get a perfect

clear reticle while looking through the scope pointing

at a flat plane surface. This is important to do prior to

mounting.

ATHLONOPTICS.COM

Fast Focus Ring

B) ADJUST FOR MAXIMUM EYE RELIEF

You need to adjust the scope for maximum eye re-

lief before tightening of the scope mount to avoid

injury from recoil.

ii. With the rifle in normal shooting position, look

through the scope and slowly move the scope and

mount back towards you. When you finally see the

full field of view with sharp and clear edges, stop.

iii. Tighten the mount on the base or rail on top of

your rifle.

C) BORE SIGHTING

Bore sighting is a preliminary procedure to achieve

proper alignment of the scope with the rifle's bore.

iv. The initial bore sighting of the scope can be at

short range of 50 yards. This is easier than trying

to bore sight at 100 yards and will get you on the

paper at that distance, so to save time and mon-

ey at the shooting range. We highly recommend

using a bore sighter, but make sure to follow the

manufacturer's instructions.

ATHLONOPTICS.COM