Dreame Bot L10 Pro Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Aspiradora Dreame Bot L10 Pro. Dreame Bot L10 Pro 14 páginas. Robot vacuum and mop

Imprimir página

1. Preparation before Use

Connecting with Mi Home/Xiaomi Home App

This product works with the Mi Home/Xiaomi Home app. * Use the Mi Home/Xiaomi Home app to control your device and to interact with other

smart home devices.

1. Download the Mi Home/Xiaomi Home App

Scan the QR code to download and install the app. You will be

directed to the connection setup page if the app has been installed

already. Alternatively, search "Mi Home/Xiaomi Home" in the app

store to download and install it.

2. Add Device

Open the Mi Home/Xiaomi Home app, and tap "

" in the upper

right. Then tap "

" in the top right corner, scan the QR code,

add "Dreame Bot L10 Pro", and follow the prompts to finish the

connection.

Note:

• Only 2.4GHz Wi-Fi is supported.

• The version of the app might have been updated, please follow the

instructions based on the current app version.

3. Reset Wi-Fi

Simultaneously press and hold the buttons

and

until you hear

a voice say, "Waiting for the network configuration." Once the Wi-Fi

indicator is blinking slowly, the Wi-Fi has been successfully reset.

Wi-Fi Indicator

·Blinking slowly: To be connected

·Blinking quickly: Connecting

·On: Wi-Fi connected

Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and

add the device again.

How to Use

1. Turn On/Off

Press and hold the button

for 3 seconds to turn on the robot. Once

the power indicator turns solid white, the robot is in standby mode.

To turn off the robot, press and hold the button

for 3 seconds when

the robot is not moving. Turning off the robot will end the current

cleaning task.

2. Start Cleaning

Press the button

briefly to turn on the robot. Upon activation, the

robot will accurately map out a route, methodically clean

along the edges and walls, then finish by cleaning each room in

an S-shaped pattern to ensure a thorough job.

Note:

• Before a cleaning task, make sure the robot is fully charged and starts

from the charging dock. Do not move the charging dock while the robot is

cleaning.

• If the battery is too low, the robot will automatically return to the dock

to charge. It will resume unfinished cleaning tasks after charging to the

necessary battery level. (The breakpoint continuous cleaning function must

be enabled on the app in advance.)

3. Cleaning Mode

Dreame Bot L10 Pro has four cleaning modes: Quiet, Standard,

Strong and Turbo. The default mode is Standard. You can specify the

cleaning mode in the Mi Home/Xiaomi Home app.

4. Pausing/Sleep Mode

Pausing: Press any button to pause the robot during cleaning.

Sleep Mode: The robot will automatically enter Sleep Mode after 10

minutes of inactivity, then the power and charging indicators will go

off. To wake up the robot, press any button.

Note:

• The robot will turn off automatically if left in Sleep Mode for more than 12

hours.

• When the robot is paused, placing it onto the charging dock will end the

• current cleaning task.

5. Do Not Disturb Mode

Do Not Disturb Mode prevents the robot from automatically starting

cleaning tasks, and the power indicator remains off. You can enable

Do Not Disturb Mode or modify its hours in the app. (The mode is on

by default from 22:00 to 08:00.)

Note:

• Scheduled cleaning tasks will still be carried out during the DND period.

• The robot will continue cleaning after the DND period ends.