Athom Homey Manual - Página 3

Navegue en línea o descargue pdf Manual para Controlador Athom Homey. Athom Homey 5 páginas.

Imprimir página

AND checks conditions (can be more than one).

These must generally be true in order for the

flow to be executed. Examples are whether it is

raining or not, it is after a point in time, it's a

Wednesday, etc.

THEN executed the events in the case that the IF

event is triggered AND the conditions are true.

Here, Homey controls devices, and all outputs

can be used, such as voice, TV control, switches,

and much, much more.

SETTINGS AND CONFIGURATIONS

Settings panel

Homey has a settings panel in which different

settings can be adjusted. Accessible via

my.athom.com, the settings include system

settings like language, voice and your location.

Also, an overview of all installed apps can be

retrieved, and app specific settings (such as a

selecting the relevant app in the left pane of the

interface.

Device Settings

You can also change the settings of a single

device, for instance what is plugged into a wall

socket. To do so, press the little wrench icon on

the card of the device in the Device Manager (via

my.athom.com). Here, you can change device

specific settings, if applicable. Note that not all

devices have settings that can be adjusted.

Z-Wave device settings – Advanced!

The settings for Z-Wave devices are accessible in

the same method. When you press on the

wrench of a Z-Wave device, a pop-up appears

with relevant settings.

Association

Z-Wave associations are set by adding device

node id's in the appropriate group separated by

comma's.

Homey itself features one association group to

other devices, group 1. This group is assigned to

the Z-Wave Plus Lifeline used to notify other

controllers when Homey is being reset. Up to 5

devices can be added to Homey's Lifeline.

Configuration

When setting Z-Wave device configuration

parameters in the device setting, use the comma

separated value format where the values

represent respectively parameter, size and value

ending with a semicolon. For example: 10,2,5;

Valid configuration parameters can be found in

your Z-Wave device manual.

Advanced – Z-wave settings

Z-Wave networks feature some additional

settings which advanced users might want to

tweak.

Adding in existing network

Homey is able to work as a second controller in

an already existing network, although we

recommend that you just use Homey as a

primary controller. To include Homey in your

current Z-Wave network, start a controller shift

on your current controller, navigate to Settings

(via my.athom.com) and select 'Z-Wave'. Then,

click the 'Inclusion' button under 'Advanced

Network Settings' when prompted by the

controller initializing. This will put Homey in

learn mode.

To remove Homey from the network press the

'Exclusion' button when prompted by the

controller initializing removal.

Basic Command

Homey does not react to any received Basic

commands.