Athos STICK Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Extintor Athos STICK. Athos STICK 8 páginas.

Instruction Manual

ATHOS STICK

Self-sensing thermal aerosol fire extinguishing device

1. Production description

The self-sensing thermal aerosol fire extinguishing device ATHOS STICK is an innova-

tive, clean and pollution-free high-tech fire extinguishing develope by Yacht Space SRL,

mainly for electrical fires. This product applies hot aerosol technology and adopts a new

type of cooling material to achieve the cooling effect and provide free radicals required

for fire extinguishing, which cooperates with the hotaerosol to achieve an efficient fire

extinguishing effect. The micro-nano-level fire extinguishing medium released by this

product is non-toxic, non-polluting, environmentally friendly, with highly fire extinguishing

efficiency and rapidly fire extinguishing speed. When a fire occurs, the fire extinguishing

device is preinstalled in the temperature sensing system under the label. When the am-

bient temperature reaches 170°C, it will automatically start to extinguish the fire. It is

especially suitable for unattended power distribution facilities, such as power distribution

cabinets (boxes), Program-controlled cabinets, precision instrument distribution boxes,

and can also be used for fire protection in automobile engine compartments.

2. Product specifications

Diameter / Thickness

87mm / 20mm

Protected space

Starting temperature

Fire classification

B-C-E-A surface

Working temperature

0.3 m³

170°C

-35°C +90°C

3. Application

This product is suitable for small power distribution cabinets (boxes), precision instru-

ment distribution boxes, program controlled switching cabinets, household appliances,

meter box and car engine.

4. Storage

The product should be stored in the dry and cooling place with good. Ventilation and

should be avoided hot and sunshine.

5. Method of application

This product is simple to use and easy to install. Open the package, tear off the back

adhesive plastic film, and put the product Stick it smoothly and tightly on the top of the

center or the side of the power distribution cabinet (box) that needs to be protected, and

press it firmly to make it flat.

6. Precautions

1. It is strictly forbidden to store this product near a heat source;

2. Heavy pressure is strictly prohibited;

3. It is forbidden to use after the validity period;

4. In the event of a fire, the device will automatically start up, and it can be touched only

after it has cooled down after spraying.