Forms + Surfaces levele Manual de instrucciones de instalación - Página 6

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Equipos de iluminación Forms + Surfaces levele. Forms + Surfaces levele 7 páginas. Elevator interiors with lightplane

Imprimir página
LEVELe
ELEVATOR INTERIORS WITH LIGHTPLANE
®
25
Connect power source to LightPlane
panel lead(s).
Using the quick connects, attach the
•
LightPlane Panel leads to the power box
leads.
Adjust the LightPlane Panel potentiometer
•
to desired brightness prior to installing the
ceiling.
Secure excess lead to ceiling to keep it
•
out of view.
28
Adjust the position of the ceiling.
•
Slide ceiling to center between wall panels.
T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com
© 2017 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
26
Attach U-bolts to elevator shell.
Attach U-Bolt using provided retainer
•
clip, washers and 3/8" - 16 flange nut.
29
Position retainer and locking disc.
•
Slide retainer and locking disk against
bracket.
INSTALLATION INSTRUCTIONS
4"
27
Hang ceiling from U-bolts.
Lift ceiling, engaging U-Bolts into
•
hanging clip on ceiling.
30
Secure elevator ceiling.
•
Tighten set screw in locking disk with
provided allen key to secure the ceiling in
place.
page 6 of 7 | 10-16-17