Carmanah F Series Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Equipos de iluminación Carmanah F Series. Carmanah F Series 18 páginas. Rrfb mast arm kit
También para Carmanah F Series: Manual de inicio rápido (20 páginas), Manual de instalación (20 páginas), Manual de instalación (16 páginas), Manual de sustitución del sistema de gestión de la energía (12 páginas), Manual de instalación (20 páginas), Manual de sustitución (9 páginas), Manual de instalación (18 páginas)

6.1

Connecting to the Radar Module

1. Remove the dust cap from the DB9 connector within the Carmanah E, F or G system.

2. Plug the USB-to-Serial adapter into the DB9 connector within the Carmanah E, F or G system.

3. Plug one end of the USB extension into the USB-to-Serial adapter, and the other end into the USB port of

the PC.

4. Start the Advanced Stats Analyzer program.

5. Select the "Connect to Radar" option from the top banner.

6. Click the "Connect to Radar" button. (Software scans ports until radar found.)

7. Ensure you see a "Radar Found on..." message.

8. Click "OK".

The radar module is powered by the Carmanah E, F or G system to which it is connected. To be

configured using the programming kit, the radar module must be connected to an operating

Carmanah E, F or G system.

More information about radar module settings can be found in the Houston Radar DR600 User

Manual, available at https://www.houston-radar.com. To avoid unintended operation and/or

excessive power consumption, configuration changes should be limited to those discussed in this

section. Other settings should be left at their default values.

Adjusting settings not outlined in this section may adversely affect radar detection performance.

Contact Carmanah for assistance with any configuration settings not discussed in this manual.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RADAR DETECTION KIT

carmanah.com