FORMTEK Lockformer TDC-Notcher Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Torno FORMTEK Lockformer TDC-Notcher. FORMTEK Lockformer TDC-Notcher 15 páginas.

I verify that I have read and understand the safety and operation sections

for this equipment:

It is the employer's responsibility to instruct all persons who may come in contact with this equipment

on the safe operation and maintenance of this equipment. If a language barrier or other restriction

limits understanding, this manual can be read to the individual with appropriate follow up questions to

verify understanding. Have each individual sign below only after demonstrating their understanding of

the safety practices described in this manual.

NAME

SAFETY GUIDELINES

Do not wear loose clothing, neckties, improper gloves, or jewelry while operating this machine. If

long sleeves must be worn, avoid loose cuffs or buttons, Tie back or contain long hair. Wear

proper gloves to prevent lacerations caused by sharp edges of stock as it travels through the

forming operation. Never operate this equipment unless all covers and guards are properly

installed. Be alert for loose, worn, or broken parts. Never operate this equipment unless it is in

good working condition. As the stock enters the notching dies a pinch point is created.

Keep hands clear of area and all pinch points!

Always disconnect the main power supply power and install lock outs using a lockout / tagout

procedure when making adjustments or repairs. When transporting, take into consideration that

the machine is top heavy and may suddenly tip over. The machine is designed for fixed

installations and are not intended for portability.

You are NOT ready to operate this equipment if you have not read and understood all of the

safety information in this manual.

WARNING:

Remember that the information contained in this manual is only a portion of an adequate

training program. It must be coupled with specific instructions for your application along

with full information of national and local safety regulations that may apply.

The information contained herein is to be use as a general guide only. For further

IMPORTANT

safey information obtain and read the latest ANSI bulletins

CONTACT: American National Standards Institute

11 West 42nd Street

New York, New York 10036

SOUND PRESSURE INFORMATION (noise levels)

The Lockformer TDC-Notcher described in this manual has been tested for noise DB levels.

At normal operating distance the machine should be no more then 85DB.

YEAR OF MANUFACTURE

VER. TDC-Notcher -CE 03-2006

SAFETY FIRST

DATE

NAME