Andatech ALX3000 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba Andatech ALX3000. Andatech ALX3000 20 páginas. Ignition interlock

Unplugging the control box:

Follow these instructions to remove the control box if requested by Andatech during a service.

1. Switch off your car engine. Be prepared with the override plug that was provided with your

device.

2. Locate the control box (location should have been provided by your installer after installation).

3. Disconnect the two plugs connecting the control box to the car.

4. Attach the override plug into the large plug that is still connected to the car.

*This step is important to enable your car to start normally with the control box removed.

5. Safely pack and send the control box back to Andatech for service.

For questions or assistance, ask an autoelectrician or call Andatech on 1300 800 200.