Andatech PRODIGY 3 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba Andatech PRODIGY 3. Andatech PRODIGY 3 14 páginas. Industrial breathalyser

7. If alcohol was detected during a passive test, clean the sampling cup or use a new sampling cup

to prevent residual alcohol from affecting the next test result.

8. Select

to print the test result.

Note: A passive test only checks for the presence of alcohol in a breath sample. An accurate test

result can only be obtained via a Standard Test using a mouthpiece. Passive test results will not be

stored in the device but can be printed immediately after a test is taken.

Record

1. The device can store over 100,000 test records along with the subject's photo.

2. Select the Record icon to view details of past test records.

3. Select

to print out individual test records.

4. Select

to search for test records based on their record number, date, time, mode or result.

Then press

Calibration

1. When the screen displays "Calibration Needed", it means the device has passed its calibration

due date.

2. Contact an authorised calibration centre to get the device calibrated.

GPS

1. Shows the longitude and latitude of the device location.

2. The longitude and latitude of the test is stored and printed on the printout.

3. Uncheck the "Print GPS" tickbox under the "Print" Settings to disable printing the GPS location

on test records.

Note: The GPS function requires 3-8 minutes after startup to begin locating correctly. Ensure the

device is in an open area in order to receive a signal. If no GPS signal is detected, the longitude and

latitude will not be shown on the printout.

3G/4G

1. Applicable for devices with 3G/4G module only.

2. Insert SIM card.

3. Apply your preferred cellular network settings.

again to conﬁrm.