Carmanah F Series Manual de inicio rápido - Página 15

Navegue en línea o descargue pdf Manual de inicio rápido para Panel solar Carmanah F Series. Carmanah F Series 20 páginas. Rrfb mast arm kit
También para Carmanah F Series: Manual de instalación (20 páginas), Manual de instalación (16 páginas), Manual de sustitución del sistema de gestión de la energía (12 páginas), Manual de instalación (20 páginas), Manual del usuario (18 páginas), Manual de sustitución (9 páginas), Manual de instalación (18 páginas)

5.1

Push Button Installation (R920-E/F & R820-E/F Beacons)

If the E or F Series is wired for a push button but none is needed (such as

an advance RRFB), insulate the ends and secure the wires.

The push button can be connected in either polarity.

1. For round poles, cut holes to size and tap as required. Deburr the hole that the push button wiring will

pass through.

2. Feed the push button cable through the pole, creating a drip loop.

6.1

Battery Installation

Once the solar engine is secured and the beacons and other devices are in place, the batteries can be installed.

1. Open the solar engine and install the batteries, connecting each battery using the correct polarity. Secure

batteries with battery strap; note proper routing.

2. Batteries must be installed with the terminals facing outward (E Series, left image below) or upwards (F

Series, right image below).

3. The system will power up once the batteries are connected. If it is part of a radio-connected group, all

members of the group will now be able to communicate with each other.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

E/F SERIES QUICK START GUIDE

carmanah.com