ANDELI TIG-250PL ACDC Manual del usuario - Página 18
Navegue en línea o descargue pdf Manual del usuario para Inversor ANDELI TIG-250PL ACDC. ANDELI TIG-250PL ACDC 20 páginas. Inverter ac/dc pulsed tig welder
Imprimir página
Available parameters where 2T mode have been selected:
Pre-flow time
Unit
S
Setting range
0.1—1
Factory setting
0.3
Start (No such function)
Upslope time
Unit
S
Setting range
0—10
Factory setting
0
TIG :Welding current
Unit
A
TIG-250
10—200 (TIG-DC)；10—200 (TIG-AC-HF)； 30—200 (TIG-AC-LIFT)；
Base :Base current
Unit
A
TIG-250PL
10—200 (DC)；10—200 (AC-HF)；10—200 (AC-LIFT)
Important! Only selectable when "pulse key" has been pressed.
Suggestion! Ib and Iw can not differ greatly.
Width Ratio of pulse duration to base current duration
Unit
%
Setting range
5—100
Factory setting
5
Important! Only selectable when "pulse key" has been pressed.
Hz: Pulse frequency
Unit
Hz
Setting range
0.5—200
Factory setting
0.5
Important! Only selectable when "pulse key" has been pressed.
Dslope : Downslope time
Unit
S
Setting range
0—10
MAINTENANCE AND TROUBLESHOOTING
16