Formula Sound FF-4.2L Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ Formula Sound FF-4.2L. Formula Sound FF-4.2L 12 páginas.

The signal from the crossfader that is routed to the output is dependent on the

position of the crossfader, with crossfader set full left any XFA selection is sent to the

output and with the crossfader full right any XFB selection is sent to the output.

With the crossfader in centre position equal amounts of XFA and XFB will be sent to

the output, with the crossfader off to one side (but not at end) a mix of XFA and XFB

will be sent to the output. The relative level of XFA and XFB will depend on the

position of the crossfader, more to the left and XFA will be larger and more to the

right and XFB will be larger.

The rate at which the signal changes from XFA to XFB as the crossfader moves left

to right (or vice versa) can be adjusted by the contour control.

A recessed switch in the base of the unit can switch the crossfader off.

MONO or SUB BASS output

There is an output on a balanced XLR that can be MONO or MONO SUB BASS;

there is a recessed switch on the base of the unit for selection.

Record output

A record output is provided on a pair of phono style sockets.

Remote mute

The remote mute connection is on a 2 pin rectangular connector, shorting pin 1 and

pin 2 will mute the mixer with the exception of the console microphone and any

channel 1 and/or 2 microphones set post booth.

This may be used to interface to a fire alarm, if the alarm has a set of isolated contacts

that close on alarm then these may be used directly, otherwise an isolating interface

relay will be required.

Formula Sound Direct

https://formulasounddirect.com