Anden A65 Manual de instrucciones de instalación - Página 3

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Controlador Anden A65. Anden A65 7 páginas. Humidifier control

INSTALLATION

See FIGURES 2 & 3�

1. Remove front cover by pulling straight out�

2. Position the back plate on the wall and mark the locations for the wire access hole and the

mounting screws� Note: The mounting holes can also be used to secure the back plate to a

standard horizontally mounted junction box�

3. For mounting on drywall, drill two 3/16" dia� mounting holes and a 3/4" opening for the wires�

4. Insert the drywall anchors provided into the mounting holes flush with the wall surface�

5. Run 4-wire cable from the humidifier to the control location�

6. Secure back plate using the two #8 x 1-1/2" screws provided�

7. After connecting the wires, tuck excess wire into the wall and fill the opening with insulating

material� Failure to seal the opening may result in inaccurate operation due to drafts�

FIGURE 2 – DISASSEMBLE CONTROL

BACK PLATE

FRONT COVER

90-2546

FIGURE 3 – MOUNT BACK PLATE

4-CONDUCTOR WIRE

SCREW

MOUNTING HOLES

WIRE ACCESS

OPENING

ANCHOR

BACK PLATE

90-2498