ATI Technologies QC-303 Manual - Página 12

Navegue en línea o descargue pdf Manual para Equipamiento industrial ATI Technologies QC-303. ATI Technologies QC-303 17 páginas. Robotic tool changer

Imprimir página
Manual, Tool Changer, QC-303
Document #9620-20-B-303 Base Tool Changer-09

4.2 Cleaning, Lubrication, Adjustment and Replacement

4.2.1
Cleaning balls and outer surfaces of male
coupling. (QC-210 shown)

Pinnacle Park
1031 Goodworth Drive
Cleaning and Lubrication of the Locking Mechanism and
Alignment Pins (Master Plate).
1.
The locking mechanism must be in the unlock state before cleaning.
2.
Use a clean rag to thoroughly remove the existing lubricant and debris
from the balls, the male coupling, the cam and the alignment pins.
3.
Check each ball to make sure it moves freely in the male coupling.
Additional cleaning may be necessary to free up any balls that are
sticking in place.
Apex, NC 27539
Tel: 919.772.0115
B - 12
Cleaning balls, cam and inner surfaces of
male coupling. (QC-210 shown)
Fax: 919.772.8259
www.ati-ia.com