Dreamline ENIGMA Instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Instrucciones de instalación para Sanitarios Dreamline ENIGMA. Dreamline ENIGMA 12 páginas. Shower door
También para Dreamline ENIGMA: Manual de instalación (12 páginas)

Imprimir página

If W<60", then you have to cut the Threshold to the size of "W".

The length to cut off will be D1

D1 = (D−W).

See Fig. 3 for details.

4. Place the Threshold (15) into the designated

position and mark the drilling holes on the floor.

Remove the Threshold, drill the holes in the

floor using Ø5/16" drill bit and insert Small

anchors Ø5/16" (18).

Apply silicone on the bottom of the Threshold

around the holes, place it back to the designated

position and fasten it to the floor with the

Countersunk screws ST4.2×30 (16).

See Fig. 4 for details.

5. Install the Guide rail (03) onto the

Stationary glass (02) with the Glass

brackets (07) and tighten the screws.

Slide the Door stoppers (01) on each

end of the Guide rail and secure them

temporarily.

Slide the Guide Rail brackets (08) on

each end of the Guide rail and

temporarily secure them as well.

See Fig. 5 and Fig. 6 for details.

Rev 2.1

Fig

. 3

Fig

. 4