Aleo S83 sol Manual de instalación - Página 11

Navegue en línea o descargue pdf Manual de instalación para Unidad de control Aleo S83 sol. Aleo S83 sol 20 páginas.
También para Aleo S83 sol: Manual de instalación (20 páginas)

Imprimir página

frames

10.2.1 Arranging the clamps

■

Permissible arrangement

■

Permissible arrangement

■

Permissible arrangement

GID AS024a

Fig.5

55Permissible clamp arrangement for framed

Fig.5

55Permissible clamp arrangement for framed

Fig.5 Permissible clamp arrangement for framed

modules

a: Symmetrical clamping on the long sides, b: Asymmetrical

a :

Symmetrical clamping on the long sides,

clamping on the long sides (acceptable for certain load

levels), c: Symmetrical clamping on the short sides.

b :

Asymmetrical clamping on the long sides

(acceptable for certain load levels),

■

Impermissible arrangement

■

Impermissible arrangement

c :

Symmetrical clamping on the short sides.

d :

Clamping on both short and long sides.

GID AS025b

Fig.6

55Impermissible clamp arrangement for framed

Fig.6

55Impermissible clamp arrangement for framed

modulesPermissible clamp arrangement for

framed modules

■

Impermissible arrangement

Impermissible clamp arrangement for framed modules

(1)a: Missing clamps, b, c: Clamping on both short and long

Fig.6 Impermissible clamp arrangement for framed

sides.

modules Permissible clamp arrangement for

framed modules

Impermissible clamp arrangement for framed modules(1)

a :

Missing clamps,

b :

Clamping on both short and long sides.

GID AS069b

Fig.7

Impermissible clamp arrangement for framed

Fig.7

Impermissible clamp arrangement for framed

modules (2)

d: Protruding clamps, e: Opposing clamps have different

distances to the module corners, f: Asymmetrical clamps on

the short sides.

Fig.7 Impermissible clamp arrangement for framed

modules (2)

10.2.2 Clamp dimensions

Protruding clamps,

Observe the following information for clamp lengths and

Opposing clamps have

depths.

different distances to the module corners,

e :

Asymmetrical clamps on the short sides.

10.2.2 Clamp dimensions

Observe the following information for clamp lengths and

depths.

aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]

Quick Reference Manual Rel. 4.7, 08/2020, EN

Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)

■

Clamp lengths and depths

■

Clamp lengths and depths

Fig. 8 Definition of clamp length and depth for framed

Fig.8

Definition of clamp length and depth for framed

modules

a : Clamp length, b : Clamp depth.

a: Clamp length, b: Clamp depth.

NOTE

• The required minimum length of a clamp (parallel

to the frame side) is 30 mm.

• The required minimum length of a clamp (parallel to

the frame side) is 30 mm.

• The required minimum depth of a clamp

(perpendicular to the frame side) is 3 mm.

• The required minimum depth of a clamp (perpen-

dicular to the frame side) is 3 mm.

• aleo solar recommends a clamp depth of 5 mm.

• Depending on the ambient conditions (e.g. angle,

suction load or tolerances of the substructure) a

• Depending on the ambient conditions (e.g. angle,

suction load or tolerances of the substructure) a

higher minimum area per clamp may be required.

• The clamps determine the actual clamp depth and

length.

• Observe the instructions of the clamp

• Observe the instructions of the clamp manufacturer.

manufacturer.

10.2.3 Tightening torque for clamp mounting

Tighten the screws on the clamp manually. If you use an au-

Tighten the screws on the clamp manually. If you use

tomatic screwdriver, then set a suitable maximum tightening

an automatic screwdriver, then set a suitable maximum

torque. You can find details for this in the manufacturer's

tightening torque. You can find details for this in the

documentation for the substructure.

manufacturer's documentation for the substructure.

10.3

Clamp mounting for modules with Solrif

10.3

Clamp mounting for modules with Solrif

frames

NOTE

• Avoid clamp mounting for modules with Solrif

NOTE

frames. Only mount these modules with the Solrif

mounting system.

• Avoid clamp mounting for modules with Solrif

frames. Only mount these modules with the Solrif

• You can also contact the aleo solar branch in your

mounting system.

country. They will provide you with information on

• You can also contact the aleo solar branch in your

mounting systems which are already in use on a

country. They will provide you with information on

greater scale.

mounting systems which are already in use on a

greater scale.

10.4

Screw mounting

10.4.1 Modules with standard frames

The aleo modules have mounting holes with a diameter of

9 mm

The total length is 22.5 mm. The distance between the hole centres is 13.5 mm.

This applies to unlubricated screws with standard thread and strength class of 8.8

(minimum breaking load 29.2 kN).

aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]

Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)

GID AS014a

frames

Page 11/20

10.4

10.4.1

The ale

•

10.4.2

10.4.3

For M8

24 Nm.

10.5

10.5.1

Observ

system

Althoug

Ch. 8.4

frames

10.5.2

Only m

mounti

10.6

A load

Loads f

which n

installe

er insta

sume a

10.6.1

Load

The to

is 13.5

This a

of 8.8