Anderson RB-200 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Maquinaria agrícola Anderson RB-200. Anderson RB-200 5 páginas.

QUICK START GUIDE (WITH BALE)

RB200

When the machine is to be delivered to the user there are steps you must follow to be sure they are

comfortable with wrapping their first bale. These steps are also important if you are doing a live demo.

Setup is very important to bale size as this machine is not set to a specific bale at the factory.

1) Know your bale size before you start. Asking can help but an actual measurement of

the bale is sometimes necessary.

2) Be sure that everything is greased (if left for more than 3 months outside without use

the machine needs to be fully greased and oiled.

3) Your bale counter is charged and tested operational (see user manual on machine for

functions).

4) Be sure the tractor you are using is open center hydraulics and can handle the machine

weight.

The stretcher pole has 3 positions. Be sure that the position is

not over the height of the bale or under it. (This part is normally

removed for shipping so be sure to install it correctly to wrap

your bales)

Put plastic in the stretcher. There

is only one way to put the plastic

through. See the diagram to the

left. This is a sticker found on the

machine as well.

Set the cone rollers for 4 or 5 foot

long bale.