Bosch Programme Table Manual de instrucciones - Página 4

Imprimir página

Bosch Programme Table Manual de instrucciones

Inspecting

the dryer

nnecting the

mains plug

oading laundry

age 8.

woollens"

he programme

Water tank

drying programme ...

filling hole

with filter

idual requirements

Cover for

steam nozzle

are sensitive,

h is enough!

Start/Stop button

2h;

1 -24 hrs

loud).

0, 1, 2, 3, 4

On-Off

for the

0, 1, 2, 3

esetting = 0.

he others.

600-1800

Drying

Condensation container

Drum

Control panel

Air cooler

Air inlet

Fluff filter

Drying / Short spin /

Refresh

Emptying condensation

Empty the container after each drying cycle, not during drying!

Remove the container, holding it level.

Pour out condensation.

Push the

container back in until it clicks into place.

Cleaning the fluff filter

Open the door, remove the filter and fold open.

Remove the fluff (by wiping the filter with your hand).

Close the filter, insert it again and close the door.

Remove fluff from the door and the area around it.

Very dirty or blocked filters should be rinsed under warm

water, and then dried thoroughly.

Clean the filter in the water tank

Remove the condensation tank.

Remove the filter.

Clean the filter under running water.

Re-insert the filter and push in the condensation tank until it clicks into

place.

Switching off the dryer

Turn the programme selector to Off.

Do not leave damp laundry in the dryer.

Removing the laundry

The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for

an hour (or two hours if you manually select the

Programme end

once

lights up in the display.

Interrupt programme

removing or adding laundry.

The drying cycle can be interrupted for a brief period so that laundry may be added or removed.

The selected programme must then be continued until it is finished.

Hot steam may escape during the Steam Drying / Steam Refresh programmes.

Open the door. The drying cycle is paused.

Remove or add laundry and close the door.

If required, select a new programme and additional functions.

Press the

Start/Stop button. The remaining time is updated after a few minutes.

if it is dirty

Reduced Ironing function, depending on the model.)