Bosch Programme Table Manual de instrucciones - Página 7

Imprimir página

Bosch Programme Table Manual de instrucciones

Technical data

Dimensions (DxWxH)

Weight

Max. capacity

Ambient temperature

Connection voltage

Connected load

Fuse protection

Ambient temperature

Product number/

Production number

You can find the rating plate on the back of the dryer.

Consumption rates

Cottons 8 kg

Cupboard Dry*

Iron Dry*

Easy-Care 3.5 kg

Cupboard Dry*

*Test program according to DIN EN 61121.

**The values may differ from the those specified depending on the type of fabric, mixture

of laundry to be dried, residual moisture in the fabric and loading capacity.

Drum interior light

(depending on model)

The drum is illuminated after the door is opened or closed, and also after the programme

is started. It goes out automatically. Replacing the bulb

Optional accessories

Exhaust air set

(depending on model)

WTZ

The exhaust air is conveyed directly via a hose.

1130

Washer-dryer stack connection set

WTZ

11310

The dryer can be placed on top of a suitable washing machine with the same width and depth

to save space. This connection set must always be used to secure the dryer to the washing

machine. With pull-out worktop: WTZ 11300

Installation underneath the worktop

WTZ

10290

Risk of electric shock!

Instead of the appliance covering plate, you must have a metal cover fitted by an expert.

60 x 60 x 85 cm (height adjustable)

approximately 36 kg

8 kg

5 - 35 °C

see appliance rating plate

These are guide values determined under standard

conditions. Fluctuations up to 10% are possible.

Spin speed in rpm

Drying time

(residual moisture)

in min.**

13 A

1400 (approx. 50 %)

1000 (approx. 60 %)

118

800

(approx. 70 %)

135

1400 (approx. 50 %)

1000 (approx. 60 %)

800

(approx. 70 %)

107

800

(approx. 40 %)

600

(approx. 50 %)

(bulb E14, 25 W)

Page 10.

(order from the after-sales service using the order number)

What to do if ...

If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service.

We will always find an appropriate solution and will avoid unnecessary visits by engineers.

Trust the expertise of the manufacturer and rest assured that the repair will be carried out by

trained service technicians using original spare parts. The contact details of your local after-

sales service can be found in the enclosed after-sales service directory, or by calling one of

these numbers:

– GB 0844 8928979 (Calls from BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply.)

– IE 01450 2655

When contacting the after-sales service, please quote the appliance's product number (E no.)

and production number (FD) (see the inside of the door).

Set the programme selector to Off and remove the appliance plug from the socket.

The

Start/Stop indicator lamp

does not light up.

The Filter/Venting Hose

and

Start/Stop indicator lights

are flashing.

Dryer does not start.

Energy

consumption

in kWh**

The door opens by itself and/or

13 A

the Door indicator light is lit.

Programme terminated shortly

3.50

after starting.

4.20

Water is running out.

4.79

Creasing.

2.37

3.15

3.84

Drying result is not satisfactory

(laundry feels too damp).

1.18

1.48

Drying time too long.

The humidity in the room

increases significantly.

One or more indicator lights for

programme status are flashing.

Mains failure.

The interior light is not working

(depending on model).

Condensation in the exhaust air

duct.

Mains plug plugged in?

Programme selected?

Clean the fluff filter under running water

Exhaust air duct blocked or knicked?

Clean the exhaust air duct

Page 6.

If necessary, clean the insect screen on the exhaust air pipe.

Start/Stop button selected?

Door closed?

Programme set?

Push the door closed until you hear it engage.

Ambient temperature higher than 5 °C?

Align dryer horizontally.

Laundry load exceeded?

Remove articles of clothing immediately after

the end of the programme, hang up and pull into shape.

Unsuitable programme selected

Page 7.

Warm laundry feels damper than it actually is.

The selected programme does not suit the load. Use another

drying programme or, in addition, select the time programme

Page 7.

Use fine adjustment for the drying result

Fine layer of limescale on the humidity sensors

Clean the humidity sensors

Page 6.

Programme termination, e.g. tank full, mains power supply failure,

door open or maximum drying time reached.

Rinse the fluff filters under running water

Insufficient supply of air

ensure that air can circulate.

Air inlet possibly blocked

Clear inlet

Ambient temperature higher than 35 °C

Make sure the room is sufficiently ventilated.

Clean the fluff filter under running water

Check installation conditions

Page 8.

Exhaust air duct blocked or knicked?

Clean the exhaust air duct

Page 6.

If necessary, clean the insect screen on the exhaust air pipe.

Switch off, leave to cool down, switch on again, restart

programme.

Remove laundry from the dryer immediately and spread out.

This allows the heat to dissipate.

Pull out the appliance plug, remove the cover cap in the interior

above the door (use Torx 20 screw driver) and replace the bulb.

Close the cover cap.

Never operate the dryer without a cover cap.

Exhaust air duct too long? Check the maximum exhaust air duct

length. Further information

Installation instructions for exhaust

air duct.

Page 4

Page1/2 and 6.

Page 4.

Page 8.

ventilate the room.

Page 4.