Andersons Model2000 Manual - Página 4

Navegue en línea o descargue pdf Manual para Esparcidor Andersons Model2000. Andersons Model2000 8 páginas. Professional rotary spreader

Operation

1) Check product bag for rate setting (letter), cone setting

(number), and swath width. The rate setting is achieved

by loosening the rate control knob and sliding the rate

control plate to the desired letter. The cone setting is

used to control spread pattern and is adjusted by

rotating the index tab on the orange helical cone to

the desired number.

2) Pull the main shutoff lever to the closed position

before filling the hopper.

3) Start rolling the spreader forward before opening the

ports; close ports before stopping.

4) Hold handle so that the hopper is level.

Tipping the spreader too far forward or

backward will cause uneven spreading.

5) Use the swath width recommended on the bag for your

spreader model and push the spreader at 3 mph (a brisk

walking pace). Apply material only in the forward direction - not

while pulling.

6) The settings given on the product label are recommended starting

points. Test rate and pattern on a small area before treating a

large area. Actual application rate can vary depending on weather,

spreader condition, and walking speed.

7) A hopper cover is provided with your new spreader. Use it to protect turf

product inside the hopper from light rain or windy conditions during trans-

portation.

Overlap

Swath

Width

Use swath width on

package or adjust per

operator's walking speed

Rate Control Plate

Helical Cone

Main Shut Off Lever

Cone

Setting