CAROL BTM-211R Manual - Página 5

Navegue en línea o descargue pdf Manual para Amplificador CAROL BTM-211R. CAROL BTM-211R 7 páginas. Bluetooth amplifier

Bluetooth Receiver Off

3.4.3 When the Bluetooth function is on, it goes into the scanning mode, and the

Bluetooth Connecting LED will blink Green and Red in turn every second. At this

time, Bluetooth transmission device (such as cell phone or computer) can be used

to pair with BTM-211R.

3.4.4 To turn off the Bluetooth Receiver, press Bluetooth Pair Button for about 3

seconds. The Bluetooth Connecting LED will blink Red 4 times and then goes off,

it indicates the Bluetooth Receiver is now off.

3.4.5 If the pairing process does not work, press the Bluetooth Pair Button 5 times to

reset the Bluetooth Receiver. When the Bluetooth Connecting LED flashes Red

quickly, it indicates the memory has been cleared, and the Bluetooth Receiver will

go into the scanning mode (LED blinks Green and Red in turn every second),

please repeat the pairing process. To turn off the BTM-211R power, simply press

on the Power Button, and when the Power LED goes off, it indicates the power is

now off.

3.4.6 When connecting a computer or cell phone with BTM-211R, the device name will

appear as "CAROL BTM-211R", and the password is "0000" when needed.

4. Troubleshooting:

4.1

Cannot power on: Check if the DC adaptor is well connected.

4.2

No sound: Check if the speaker, AUX, and microphone cables are well connected.

4.3

Volume too low or too loud: Adjust the Volume Controllers to a suitable level, or

adjust the volume on the external sound source device (such as MP3 Player, CD player)

/ Bluetooth sound source (such as cell phone, computer).

4.4

Bluetooth connect failed: It is suggested to delete the existing pairing from cell phone /

computer first, and then start a fresh device scan. The existing pairing in BTM-211R

also needed to be cleared.

5. Specification:

5.1

BTM-211R Bluetooth Amplifier:

Model：BTM-211R

Quiescent Current: 140mA

Power Consumption: 50W (MAX)

Bluetooth Version: Bluetooth V2.1 EDR

Support: Advanced Audio Distribution Profile (A2DP)

Microphone Input: ø 6.3mm Female Jack

External Sound Source Input: ø 3.5mm Female Jack

Output Connector：2 Pin Speaker Connector, suitable for single driver speaker (4~8Ω)

Red blinks 4 times in 4 seconds