Dreamline Sector Manual de instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Productos de fontanería Dreamline Sector. Dreamline Sector 8 páginas. Shower enclosure

Imprimir página

Preparation

1. After opening the boxes, read this introduction carefully, check all the packed parts are

complete by cross checking all the components against the "Detailed Diagram of

Shower Enclosure Components". Examine for shipping damage. If the unit has been

damaged, has a finishing defect or has missing parts please contact your local

distributor within 3 business days. Please note that Bath Authority

will not replace any damaged product or missing parts free of charge after 3

business days or if the product has been installed. Contact your distributor or

DreamLine if you have any questions.

2. Please note that you should consult your local building codes on questions on

installation compliance standards. Building and plumbing codes vary by

location, and DreamLine is not responsible for code compliance standards for

your project.

3. Install all of the required plumbing and drainage before securing the shower. Use a

competent and licensed (if required by local code) plumber for all plumbing

installation.

4. Please insure that prior to the installation the floor is leveled and solid and will be able

to support the total weight of the unit and its occupant. Also make sure the walls are at

right angles. While some adjustment in leveling of the tray is possible, irregular floor

level or improper angle of side walls will result in serious problems for your installation.

Please, note that there are some adjustments and drilling might be necessary during

the installation process.

Tools Required

Caulk

Level

Rev. 1.4.

Tape

Measure

Pencil

Caulk

Gun

Drill bit

(D=3mm)

Wrench

Phillips

Electric

Screwdriver

Drill

/ DreamLine