Dreamline UNIDOOR Instrucciones de instalación - Página 9

Navegue en línea o descargue pdf Instrucciones de instalación para Recinto Dreamline UNIDOOR. Dreamline UNIDOOR 13 páginas. Shower door

If the Stationary Panel width is 6", the installation is

finished.

If the Stationary Glass width is 12" and over you will

need to continue your installation from:

a) Step 13 for Support Bar installation.

b) Step 15 for Glass Shelves installation.

Support bar installation

13. Locate the Support bar (12).

Adjust the bar to a proper position on the glass and the

wall. Level it horizontally. Hold it firmly and outline the

bracket's position on the wall. Remove the Support bar

and detach the wall bracket from it. Place the wall

bracket against its outlined position on the wall and

mark the drilling hole.

Drill the hole using Ø 5/16" drill bit; insert the Wall

anchor (13) and fasten the wall bracket to the wall with

the Screw ST4.2×30 (15). Attach the Support bar to

the wall as shown on Fig 14.5 and tighten the set screws

and the glass holding screw to secure the glass.

See Fig. 14 for details.

14. Apply the sealant along the connection of the

Stationary glass and the Shower base or threshold.

Rev 2.1

Fig

. 12

Fig

. 13

Ø 5/16"

Fig

. 14