Carol-Ann Custom Amplifiers OD-2 Series Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Carol-Ann Custom Amplifiers OD-2 Series. Carol-Ann Custom Amplifiers OD-2 Series 11 páginas. 50w & 100w amplifier

Imprimir página

1. Replacing Tubes

Rear Panel (cont)

11.

Effects Loop Send Level – Set according to the devices used in the loop to match the input level correctly.

Note: This control can be used to attenuate the overall volume of the amplifier, even when no effects devices

are connected to the loop and is useful to help get more range on the master volume controls. This is really

useful when when playing small venues or for practicing quietly. Please note that if this Level Control is set to zero

then no sound will come out of the amplifier.

12.

Footswitch Connector – The footswitch is attached to the amplifier via a standard 3 pin XLR-XLR

Microphone cable; therefore it is easily possible to extend the length of this cable. However, to ensure reliable

performance keep the maximum length from exceeding 100 feet. The left hand switch on the footswitch (Amber

LED) operates the channel selector (or mid boost if fitted). The right hand switch on the footswitch (Red LED)

operates the channel selection.

Page 7 of 11