ANDI ACHF643 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Placa de cocción ANDI ACHF643. ANDI ACHF643 10 páginas. Andi ceramic cooktop instruction manual

Imprimir página
Cautions
1.
The ceramic cooktop must be installed by qualified personnel
or technicians. Please never conduct the operation by yourself.
2. The ceramic cooker hob shall not be mounted to cooling equipment,
dishwashers and rotary dryers.
3. The ceramic cooktop shall be installed such that better heat radiation
can be ensured to enhance its reliability.
4. The wall and induced heating zone above the table surface shall
withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
6. A steam cleaner is not to be used.
Power line connection
The socket shall be connected according to the relevant standard
or connected to a single-pole cut-out. The method of connection
is shown in Figure (3):
Voltage&frequency
220-240V
50\60HZ
220-240V 2+2-N
50\60HZ
If the cable is damaged or to be replaced, the operation must be
carried out the by after-sale agent with dedicated tools to avoid
any accidents.If the appliance is being connected directly to the
mains an omnipolar circuit-breaker must be installed with a
minimum opening of 3mm between contacts. The installer must
ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised
technicians only.
Wire connection
1
2
L
Black&Brown
1
2
L1
L2
Black Brown
Figure (3)
4
3
4
5
N
Gray&Blue
Yellow/Green
3
4
5
N1
N2
Yellow/Green
Gray
Blue