DREAMS Yardley Manual - Página 7

Navegue en línea o descargue pdf Manual para Mobiliario interior DREAMS Yardley. DREAMS Yardley 12 páginas. Ottoman single

Assembly

Put the slat frame on the lift mechanism,

use four sets of bolts (E), flat washers (F)

and nuts (H) to loosely fit the slat frame

to the first four holes on each side

of the lift nearest to the headboard,

finger tight.

Tighten all the bolts after confirming

the metal frame is in correct position.

Frame must be in the center of bed in

length & width.

Lift up the slat frame, use the locking

nut (G) to fit the pistons to

the lift mechanism.

Note: A small gap is left so stem can

move freely. This is normal,

See the sketch.

Lift up the slat frame by one person with two hands.

Another one assemble the gas lift with nuts.

Don't over tighten, a small gap is left so stem can

move freely.

NOTE: When fully assembled and the mattress is

in position, please raise and lower the ottoman 4-5 times.

To ensure the gas pistons are fully lubricated.

Yardley Ottoman Single - Assembly Guide - Page 7

SMALL GAP