Comnet RELIANCE RLGE2FE16R Manual de inicio rápido - Página 10
Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Comnet RELIANCE RLGE2FE16R. Comnet RELIANCE RLGE2FE16R 18 páginas. Substation-rated, enhanced security scada-aware ethernet layer 2 managed switch/layer 3 router with optional 2g/3g & 4g lte cellular radio link, enhanced network security, terminal server, poe+, and 100fx sfp ports
Imprimir página
QUICK START GUIDE
Management over Console
Connecting to Device
» Device is capable of being first set up via either the console port, or via an SSH connection
» Default Username: su
» Default Password: 1234
» By default all ports act as a flat switch, with all ports as members of VLAN 1
» VLAN 1 set to hold an IP interface by default
» Default Management IP: 10.0.0.1/8
Terminal
» Power on device (Boot may take up to 3 minutes). PWR light should be green
» Console into Device
› Connect to CON port using white ComNet Console Cable. Other console cables will not
work as they have a different pinout.
› Connect to to serial port of PC, or use Serial to USB cable. (Drivers may need to be installed)
› Terminal Serial Connection
1. Install and open terminal software
2. Setup terminal for serial session
3. Determine correct COM port on PC (Device manager)
4. Enter correct COM port, enter correct baud rate speed (Default 9600)
5. Click Open to start session with device
› Press enter if screen is blank
› Default login username su, password 1234 (password will be invisible)
TECH SUPPORT: 1.888.678.9427
RLGE2FE16R
QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 10