Aler AH100 Manual de instalación rápida - Página 4

Navegue en línea o descargue pdf Manual de instalación rápida para DVR Aler AH100. Aler AH100 15 páginas. Hd vehicle mdvr

1. To turn the electronic lock clockwise to lock it after HDD/SD card and SIM card

are installed; otherwise, the device

2. To ensure prolonged and stable operation, it is advised to

horizontally installed

3.It is recommended to install 3G/4G, GPS and WiFi

will not

4.This product has 8

RS485, and two RS232 extended

toappropriate devices according to requirements of vehicles;

3. Power Connection

To connect the yellow cable of the power cord to ACC, the control circuit switch of the

vehicle, and the red and black ones are respectively connected to positive and negative electrode

of the vehicle power supply and then to vehicle MDVR. When testing the wiring condition,

twisting the red cable and yellow cable together and connect to the positive electrode, while the

black one is connected to the negative electrode.

It is suggested that the MDVR power cable to be directly connected to the positive and negative

terminals of the vehicle battery cell (or the vehicle battery cell with fuse box). DO NOT connect

the MDVR power cable to any metal conductor subjects of the vehicle, which may influence

normal operation of the MDVR due to negative pulse; The power cable used for positive and

negative terminals shall have diameter of φ1.5mm or above.

and take waterproof measures;

be blocked signal or be able to receive strong signal;

channels

Figure 2 Power Wiring Diagram

will not be powered on;

of alarm inputs, 1

channels

externalports

- 2 -

have the device

antennas

in a place where it

of alarm output, one

which allow connection