Comnet FVR1010SHR Manual de instalación y funcionamiento - Página 9
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Transmisor Comnet FVR1010SHR. Comnet FVR1010SHR 11 páginas. 8-channel 10-bit digitally encoded video + 8-channel bi-directional data + self-healing ring topologies
Imprimir página
INSTALLATION AND OPERATION MANUAL
FIGURE 12 – EXAMPLE SYSTEM IN SELF-HEALING RING
A
The figure below shows a system of four FVT1010SHR units, a FVT4014SHR unit and a FVR8018SHR unit connected as a self-healing ring. Eight channels of
video enter the system at the five transmitter units and are sent to the video receiver and are displayed on a bank of monitors.
V
VIDEO IN
A
B
FVT1010SHR
Unit 1
B
The table below shows the SHR configuration switches for each unit in the system. once the system is configured, all of the PoWER, oPTIC and VIdEo
lEds will be solid green. No faults will be reported.
SHR Switch
Unit
1
2
3
1
ON
ON
ON
2
OFF ON
ON
3
ON
OFF ON
4
OFF OFF ON
TEcH SUPPORT: 1.888.678.9427
V
VIDEO IN
A
FVT1010SHR
Unit 2
FVT4014SHR
B
Unit 5
VIDEO IN
4
1 – 4
V
Notes
4
OFF Transmit video on Channel 1.
OFF Transmit video on Channel 2.
OFF Transmit video on Channel 3.
OFF Transmit video on Channel 4.
V
VIDEO IN
B
A
FVT1010SHR
Unit 3
FVR8018SHR
A
B
Unit 6
8
V
SHR Switch
Unit
1
2
5
OFF
OFF
6
NA*
OFF
Switch 1 on the FVR8018SHR unit is not used currently and is reserved for a
future release.
FVT/FVR8018SHR
V
B
A
FVT1010SHR
Unit 4
A
VIDEO OUT 1 – 8
(e.g., Bank of Monitors)
Notes
Transmit video on Channels 5 – 8
Receive video from Channels 1 – 8
VIDEO IN
B
INS_FVT/FVR8018SHR_REVA
11/14/11
PAGE 9