ATK 1988 406 Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Motocicleta ATK 1988 406. ATK 1988 406 20 páginas.

ENGINE MAINTENANCE

CLUTCH ADJUSTMENT

If you feel major adjustment is required , loosen the clutch adjustor

at the handlebar to provide maxima.an slack of the cable.

Remove the clutch adjustment access plug on the left sidecover. There is

an llmm lock nut and a slotted adjusting screw.

NOTE:

Special wrench is provided in the tool kit to loosen the

11.nln

locknut.

Turn the slotted adjusting screw in until contact is made with the release

bearing. Then turn out

1/8 -1/4

turn from the contact point.

Carefully retighten the llmm lock nut to secure the clutch adjustment.

Replace the access plug.

TRANSMISSION OIL CHANGE

Start the engine and allow it to wann up briefly. Remove the 6mm Allen

head bolt from the bottom of engine and completely drain the oil.

NOTE: Don't remove the

17nun

bolt head kickstart spring retaining bolt.

The drain plug tip is magnetized and should be cleaned of metal particles

before installing the drain plug.

Remove the filler/vent plug and refill the transmission with lOOOcc

(32

US oz) of a li ht viscosit

ear oi until the oil reaches the oil

level

(&nm

allen bolt

inspection hole. The level plug is located

behind the gear change lever.

Examples of Light Viscocity Gear Oils:

Bel-Ray Light Viscosity

Mobil 1 75W-80

Amsoil 75W-80

Silkolene Gear oil Light 75W

Dura Lube Gear and trans oil LV

There are a number of other Light Viscosity Gear oils on the market, this

list is meant as a partial example of available products only.

In a pinch

20W-50 Motor oil may

used.