Electrolux EGC3322 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Placa Electrolux EGC3322. Electrolux EGC3322 20 páginas. Electrolux hob
También para Electrolux EGC3322: Manual del usuario (16 páginas), Manual del usuario (20 páginas), Manual del usuario (20 páginas)

Imprimir página

10 www.electrolux.com

TROUBLESHOOTING

There is no spark when

lighting the gas

The flame is blow out im-

mediately after ignition

The gas ring burns un-

evenly

If there is a fault, first try to find a solution to

the problem yourself. If you cannot find a

solution to the problem yourself, speak

your dealer or the local Service Force Cen-

tre.

If you operated the appliance incor-

rectly, or the installation was not

carried out by a registered engi-

neer, the visit from the customer

service technician or dealer may

not take place free of charge, even

during the warranty period.

These data are necessary to help you

quickly and correctly. These data are

available on the supplied rating plate.

• Model description .................

Problem

Possible cause

• There is no electrical

supply

• Burner cap and crown

are placed uneven

• Thermocouple is not

heated sufficient

• Burner crown is blocked

with food residues

• Product number (PNC) .................

• Serial Number (S.N.) .................

Use the original spare parts only. They are

available at Service Force Centre and ap-

proved spare parts shops.

LABELS SUPPLIED WITH THE

ACCESSORIES BAG

Stick the adhesive labels as indicated be-

low:

Remedy

• Make sure that the unit

is connected and the

electrical supply is

switched on.

• Control the fuse. If the

fuse is released more

than one time, refer to a

qualified electrician.

• Make sure that the

burner cap and crown

are in correct positions.

• After lightning the flame,

keep the knob pushed

for approximately 5 sec-

onds.

• Make sure that the in-

jector is not blocked

and the burner crown is

clear of food particles.