Andis Blade Zero Gapper Uso y cuidado - Página 2

Navegue en línea o descargue pdf Uso y cuidado para Productos de cuidado personal Andis Blade Zero Gapper. Andis Blade Zero Gapper 2 páginas. For outliner & styliner blades

Imprimir página

FOR USE ON OUTLINER

Using a small screwdriver, turn screws 1/4 turn

to left to loosen.

FOR USE ON STYLINER

Using a small screwdriver, turn screws 1/4 turn to left

to loosen. Caution: Do not loosen the tension screw

completely, as this will result in a negative gap.

BLADES:

Place front end of blade under lip of blade gapper.

Place holes on the blade assembly onto the pins of the

blade gapper and pull back on the base of the blade.

The front of the blade should lift up and click into place.

BLADES:

Make sure that the blade is properly seated against

the lip of the blade gapper.

Push the upper blade adjustment bracket forward

as far as it will go until the upper blade is firmly

against the angled metal surface.

Push the button on the right of the locking arm to lock

into place. The button should click into place.