Electrolux EGG 9363 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Placa Electrolux EGG 9363. Electrolux EGG 9363 16 páginas. Hob
También para Electrolux EGG 9363: Manual del usuario (16 páginas), Manual del usuario (20 páginas)

Imprimir página

www.electrolux.com

The stainless steel can become tarnished

if it is too much heated. Refer to this you

must not cook with potstones, earthen-

ware pans or cast iron plates. Do not use

aluminium foil to prevent damage the top

during operation.

Removing the dirt:

– Remove immediately: melting

plastic, plastic foil, and food con-

taining sugar.

– Stop the appliance and let it

cool down before you clean: lime-

scale rings, water rings, fat stains,

shiny metallic discolorations. Use a

special cleaner applicable for sur-

face of hob.

Clean the appliance with a damp

cloth and some detergent.

6. TROUBLESHOOTING

There is no spark when

lighting the gas

The flame is blow out im-

mediately after ignition

The gas ring burns un-

evenly

If there is a fault, first try to find a solution

to the problem yourself. If you cannot find

a solution to the problem yourself, speak

your dealer or the local Service Force

Centre.

Problem

5.1 Cleaning of the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode.

Keep these components well clean to

prevent difficult lighting and check that the

burner crown holes are not obstructed.

5.2 Periodic maintenance

Periodically speak your local Service

Force Centre to check the conditions of

the gas supply pipe and the pressure ad-

juster, if fitted.

Possible cause

• There is no electrical

supply

• Burner cap and crown

are placed uneven

• Thermocouple is not

heated sufficient

• Burner crown is

blocked with food resi-

dues

At the end rub the appliance dry

with a clean cloth.

Remedy

• Make sure that the unit

is connected and the

electrical supply is

switched on.

• Control the fuse. If the

fuse is released more

than one time, refer to

a qualified electrician.

• Make sure that the

burner cap and crown

are in correct positions.

• After lightning the

flame, keep the knob

pushed for approxi-

mately 5 seconds.

• Make sure that the in-

jector is not blocked

and the burner crown

is clear of food parti-

cles.

If you operated the appliance in-

correctly, or the installation was

not carried out by a registered en-

gineer, the visit from the customer

service technician or dealer may

not take place free of charge,

even during the warranty period.