Electrolux EGS6414X Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Placa Electrolux EGS6414X. Electrolux EGS6414X 20 páginas.
También para Electrolux EGS6414X: Manual del usuario (20 páginas)
Imprimir página
10
www.electrolux.com
To prevent contact between the cable
and the appliance below the hob use the
clamps which are on the side of the
cabinet.
A
A. Rigid copper pipe or flexible pipe of
stainless steel
3.6 Connection cable
To replace the connection cable use only
the special cable or its equivalent. The
cable type is: H03V2V2-F T90.
Make sure that the cable section is
applicable to the voltage and the working
temperature. The yellow / green earth
wire must be approximately 2 cm longer
than the brown (or black) phase wire.
1. Connect the green and yellow (earth)
wire to the terminal which is marked
with the letter 'E', or the earth symbol
, or coloured green and yellow.
2. Connect the blue (neutral) wire to the
terminal which is marked with the
letter 'N' or coloured blue.
3. Connect the brown (live) wire to the
terminal which is marked with the
letter 'L'. It must always be connected
to the network phase.
L
N
3.7 Assembly
1.
2.
3.
min. 100 mm
min. 55 mm
30 mm
+
2
0
4.
min. 650 mm
2
+
550 mm
0