Electrolux EGT7353NOK Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Placa Electrolux EGT7353NOK. Electrolux EGT7353NOK 20 páginas. 70cm wide gas on glass with 5 burners and individual cast iron supports.
También para Electrolux EGT7353NOK: Manual del usuario (16 páginas), Manual del usuario (20 páginas)
Imprimir página
14 www.electrolux.com
Blue
Brown
Replacement of the connection cable
1.
Connect the green and yellow (earth)
wire to the terminal which is marked
with the letter 'E', or the earth symbol
, or coloured green and yellow.
2.
Connect the blue (neutral) wire to the
terminal which is marked with the let-
ter 'N' or coloured blue.
3.
Connect the brown (live) wire to the
terminal which is marked with the let-
ter 'L'. It must always be connected
to the network phase.
There must be no cut or stray strands of
wire present. The cord clamp must be
correctly attached to the outer sheath.
To replace the connection cable
use only H05V2V2-F T90 or
equivalent type. Make sure that
the cable section is applicable to
the voltage load and the working
temperature. The yellow/green
earth wire (B) must be approxi-
mately 2 cm longer than the live
and neutral wire (A).
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that the
cut off plug is disposed of safely.
The replacement of electric cable
must be carried out exclusively by
the service force centre or by per-
sonnel with similar competencies,
in accordance with the current
regulations.
- Neutral
- Live
A
B
8.6 Building In
min. 600 mm
min. 450 mm
min. 55 mm
30 mm
A)
supplied seal
B)
supplied brackets
CAUTION!
Install the appliance only on a
worktop with flat surface.
8.7 Possibilities for insertion
Kitchen unit with door
The panel installed below the hob must
be easy to remove and let an easy access
in case a technical assistance intervention
is necessary.
min. 650 mm
560 mm
A
B