Electrolux EHDP9730IK Manual - Página 14

Navegue en línea o descargue pdf Manual para Placa Electrolux EHDP9730IK. Electrolux EHDP9730IK 20 páginas.
También para Electrolux EHDP9730IK: Manual de instrucciones (20 páginas)

Imprimir página

14 www.electrolux.com

comes on.

and a number come

on.

comes on.

Problem

Possible cause

The Automatic Switch Off

operates.

The Child Safety Device

or the Lock function op-

erates.

No cookware is on the

cooking zone.

The cookware is incor-

rect.

The diameter of the bot-

tom of the cookware is

too small for the cooking

zone.

The cookware do not

cover the cross / square

fully.

There is an error in the

appliance.

The electrical connection

is incorrect. The supply

voltage is out of range.

There is an error in the

appliance because a

cookware boils dry. The

overheating protection for

the cooking zones and

the Automatic Switch Off

operate.

Remedy

Deactivate the appliance

and activate it again.

Refer to the chapter "Dai-

ly Use".

Put cookware on the

cooking zone.

Use the correct cook-

ware.

Use cookware with cor-

rect dimensions.

Cover the cross / square

fully.

Disconnect the appliance

from the electrical supply

for some time. Discon-

nect the fuse from the

electrical system of the

house. Connect it again.

comes on again,

speak to the service cen-

tre.

Speak to a qualified elec-

trician to check the instal-

lation.

Deactivate the appliance.

Remove the hot cook-

ware. After approximately

30 seconds, activate the

cooking zone again. If the

cookware was the prob-

lem, the error message

goes out of the display,

but the residual heat indi-

cator can stay. Let the

cookware become suffi-

ciently cool and refer to

"Cookware for the induc-

tion cooking zone" to see

if your cookware is com-

patible with the appli-

ance.