Andonstar 249 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Microscopio Andonstar 249. Andonstar 249 14 páginas.
También para Andonstar 249: Manual del usuario (14 páginas)

Imprimir página

Lens B&C：

Steps：In pic 6 it marked out which parts of the microscope are involved to each step.

①Install and fix the nosepiece set with Lens B&C to the bottom of the focusing tube.

②Place the translucent backdrop board to the loophole on the stage, and place slides on it.

③Remove the two USB spot lights.

④ Loose the arm locker, located the whole monitor part to a desire height, meanwhile adjust the

height of the mechanical stage, make sure the final object distance is within 7-8mm(lens B). The

shorter the object distance is, the bigger magnification is. Or if you want to zoom in even more,

revolve the nosepiece to lens C and make the object distance within 3-4mm. The shorter the object

Lens B: Focus range: 7mm-8mm，Magnification: 390-510x (with3 times

digital zoom）

Lens C: Focus range: 3mm-4mm，Magnification: 690-1020x (with3 times

digital zoom)

Applications: Microscope slides etc.

（Pic 6 go with Lens B&C）