Andonstar AD206S Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Microscopio Andonstar AD206S. Andonstar AD206S 11 páginas.

Note:

1. The UV filter and lens cover have been installed on the bottom of the focusing controller;

2. The clips should be installed on the metal base to fix the observed object(optional);

3. Instructions for use of endoscope accessories are as follows:

①White sleeve: It protects the endoscope when detecting the bottom of the slit,

the depth of the pipe,

and the scene where the endoscope needs to be placed in other objects. (This accessory is not

waterproof and cannot be placed directly in the water).

②Black speculum: used to inspect holes with a diameter smaller than the endoscope diameter (12mm).

Black material,

the sensor will increase the image gain,

can block external stray light,

make the

center of the picture brighter.

③Side-view mirror: used to observe the back or side of an object. For example,

the inner wall of the

pipe.

④Transparent sleeve: Used to fix the object distance when observing large area flat objects. For

example: Observing circuit boards, coins, reading magnification, etc..

⑤White speculum: used to inspect holes with a diameter smaller than the endoscope diameter (12mm).

Installation tutorial

* Mounting bracket: Screw the optical bracket on to the base, referring figure3.

（ Figure3 Mounting bracket ）

（ Figure4 Bracket instructions ）

*Installation clips (optional)

1. Make sure that the direction of the clips correct before installation, as shown in the figure below,

（ Figure5 Schematic diagram of clips installation)

2. Use a screwdriver to install it on the base.