Atlanta ATH-2467 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Hervidor Atlanta ATH-2467. Atlanta ATH-2467 20 páginas.

Imprimir página
CONGRATULATIONS ON YOUR GOOD CHOICE! NOW YOU ARE THE OWNER OF
TM
ATLANTA
PRODUCT NOTABLE FOR ITS PROGRESSIVE DESIGN AND GOOD QUALITY
PERFORMANCE. WE HOPE OUR PRODUCTS WILL STAY WITH YOU FOR YEARS ON END.

BEFORE OPERATING

Please read these operating instructions before kettle operating. Before the first use
or in case of long time interruption in operation it is recommended to pour water to
the maximum level mark and bring it to the boiling. Pour off the boiled water, repeat
the procedure twice.
Do not pour cold water only, which will complete boiling, and still very hot kettle. A
large temperature difference can bad affect the materials used in the kettle. Please
wait until the kettle has cooled down a bit.

SAFETY MEASURES

•
The kettle operates from power supply; power supply technical characteristics
are specified on the factory marking of device.
•
As surface temperature of the kettle can be over 60°С, do not touch it except for
a handle and buttons.
•
Distance between the kettle and other appliances above it must be over 50 cm
in order not to be damaged by steam. Avoid close position to other appliances that
are easily distorted due to high temperature.
•
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental ability or if they have no experience or knowledge, if
they are not under control or not instructed on the use of the instrument the person
responsible for their safety.
•
Do not leave the appliance unattended when the kettle is plugged in or when
children are around. A power supply cord must not be hung down as children can pull
it, throw the kettle and get burnt.
•
To avoid the danger, if the power cord has been damaged, it should be replaced
by the manufacturer, its agent or similar qualified person.
•
The kettle must be used only upright. Never use it on uneven and non-heat-
resistant surface.
•
Use a separate socket for the kettle.
•
In case of connecting the device never use the electrical extension cord.
•
In order to avoid a fire or electric shock:
-
do not scrape the body of the kettle;
-
do not expose the electric part of the kettle to rain or water exposure;
INSTRUCTION MANUAL
DEAR CUSTOMER!
3