andover Model-One Manual del producto - Página 12

Navegue en línea o descargue pdf Manual del producto para Plato giratorio andover Model-One. andover Model-One 19 páginas. Modular stand system
También para andover Model-One: Manual del producto (14 páginas), Manual del producto (8 páginas)

Imprimir página
andover Model-One Manual del producto

Back Panel

AUX 1 (RCA jack input): Connect an external audio device, such as a CD player, tape
deck, or a radio Tuner.
AUX 2 IN (3.5mm analog/optical combo): Connect a WIFI streaming audio adapter such
as Songbird, or any other analog or digital source. You may use an analog input with a
3.5mm stereo plug, or an optical source with a 3.5mm mini Toslink plug.
The optical portion of this input will accept up to 24Bit/192kHz input formats.
This input features optional automatic signal sensing and will wake the Model One from
Standby in the presence of signal. Model-One will re-enter Standby after the absence of
signal for 5 minutes. Automatic sensing can be turned on or off in the PREFERENCES
menu.
DIGITAL Coax or Toslink optical input. Accepts SPDIF or PCM audio from an optical
connection. This input will accept up to 24Bit/192kHz input formats.
PC (USB-Mini B): Use a USB-Mini B to USB-A cable to connect to your computer for
recording or file playback. The PC interface sends and receives 44.1 or 48kHz/16 Bit
PRE-OUT (Preamp output): Outputs an unamplified signal to an external amplifier, a set
of powered speakers.
SUB-Out (Preamp output): A monaural Preamp output for use with a subwoofer.
POWER INLET CONNECTOR: Plug the Yellow end of the supplied power adapter here.
Plug the power adapter into the AC power using the cable supplied in the accessory kit.
Page 12