Atlanta 1342a Manual técnico - Página 6

Navegue en línea o descargue pdf Manual técnico para Máquina de coser Atlanta 1342a. Atlanta 1342a 20 páginas.

Technical Manual & Parts Lists

Liability

The machine should only be operated when in perfect working order, with due regard for safety and the

potential dangers, as well as in accordance with the Instruction Material. Faults and malfunctions

capable of impairing safety should be remedied immediately. We cannot accept any liability for personal

injury or property damage due to operator errors or non-compliance with the safety instructions

contained in this booklet. The risk rests exclusively with the end user.

The Instruction Material should always be kept near the machine so that it is accessible to all concerned.

The local, general, statutory and other binding regulations on accident prevention and environmental

protection must also be observed in addition to the Instruction Material. The operating staff must be

instructed accordingly. This obligation also includes the handling of dangerous substances and

provision/use of personal protective equipment.

The Instruction Material should be supplemented by instructions, including supervisory and notification

duties with due regard for special operational features, such as the organization of work, work

sequences, the personnel deployed, etc.

The personnel's awareness of the dangers and compliance with the safety regulations should be checked

at irregular intervals.

Choice and Qualification of Personnel

Ensure that work on the machine is only carried out by reliable persons who have been appropriately

trained for such work - either within the company, by our field staff or at our office - and who have not

only been duly appointed and authorized, but are also fully familiar with the local regulations. Work on

the machine should only be carried out by skilled personnel, under the management and supervision of a

duly qualified engineer.

This not only applies when the machine is used for production, but also for special work associated with

its operation (start-up and maintenance), especially when it concerns work on the hydraulic or electrical

systems, as well as on the software/serial bus system.

Training

Everyone working on or with the machine should be duly trained and informed with regard to correct

use of the safety equipment, the foreseeable dangers which may arise during operation of the machine

and the safety precautions to be taken. In addition, the personnel should be instructed to check all safety

mechanisms at regular intervals.

Responsibilities

Clearly define exactly who is responsible for operating, setting-up, servicing and repairing the machine.

Define the responsibilities of the machine operator and authorize him to refuse any instructions by third

parties if they run contrary to the machine's safety. This applies in particular for the operators of

machines linked to other equipment. Persons receiving training of any kind may only work on or with

the machine under the constant supervision of an experienced operator. Note the minimum age limits

permitted by law.