andover Model-One Manual del producto - Página 8

Navegue en línea o descargue pdf Manual del producto para Subwoofer andover Model-One. andover Model-One 14 páginas. Modular stand system
También para andover Model-One: Manual del producto (19 páginas), Manual del producto (8 páginas)

Imprimir página
andover Model-One Manual del producto

Subwoofer Setup

Install the four adjustable feet in the four bottom corners of the subwoofer by
screwing them into the threaded inserts. These may be adjusted slightly to level
the subwoofer or stand if necessary once it is in its final location in your room.
To use the Subwoofer separately:
1. Carefully remove the tempered glass top from the foam packaging and
gently place it in the recess in the center of the top frame.
2. Depending your final placement you may need to adjust the volume control
away from its center position to match the output from the Model-One Music
System from your listening position.
To integrate the Subwoofer with the stand:
1. Remove the 4 screws holding the
top panel to the subwoofer for
shipping and put aside the top.
2. Remove the
subwoofer grille
by pressing on the
grille from the back
on both sides. Slide
the grille straight
forward.
Page 8
Remove
Screws