Andrea PureAudio BT-201 Manual del usuario
Navegue en línea o descargue pdf Manual del usuario para Auriculares Andrea PureAudio BT-201. Andrea PureAudio BT-201 2 páginas.
Imprimir páginaHOW TO USE YOUR ANDREA
BLUETOOTH MONO HEADSET BT-201.
Headset Overview
1. LED Indicator Light
2. Multi-Function Button
3. Volume Control Button
4. Charging Socket
5. Noise Cancelling Microphone
CHARGING THE HEADSET
Your headset uses a rechargeable battery.
You must charge the battery fully before
using the headset for the first time.
1. Plug the USB cable into a
PC's/Laptop's USB port or use the
inluded AC wall adapter.
2. Connect the cable with the headset as
shown on the picture. The red LED
indicator of headset will turn on when
charging.
3. When the battery is full, the red LED
indicator of the headset will turn off.
4. The headset will be fully charged in
approximately 2 hours.
5. Remove the cable from the headset.
WARNING: Do not attempt to charge
the headset with anything other than
the USB charger cable provided. Using
unauthorized USB charger cable may
damage the headset.
IMPORTANT: The headset cannot be
used while charging.
PAIRING WITH YOUR BLUETOOTH
PHONE
Pairing will create a unique and encrypted
wireless link between two Bluetooth
enabled devices, such as your Bluetooth
phone and Bluetooth enabled computer.
1. Turn on headset,
then push and hold
multifunction button
untill red and blue
Bluetooth
blinking occurs.
Bluetooth
Discoverable
Paired Devices
2. Select add new
device from bluetooth
phone settings.
3. The two devices will
locate and connect
Bluetooth
On
Discoverable
Yes
Paired Devices
Add New Device
automatically.
IMPORTANT: If pairing was successful,
the indicator light will flash in blue 10
times rapidly before going to flashing once
every 3 seconds. Most phones will display
an icon when paired.
On
Yes
Add New Device