Electrolux ICON E36GC75DSS1 Manual de uso y mantenimiento - Página 13
Navegue en línea o descargue pdf Manual de uso y mantenimiento para Placa Electrolux ICON E36GC75DSS1. Electrolux ICON E36GC75DSS1 20 páginas. 30" electric rangetop
También para Electrolux ICON E36GC75DSS1: Especificación (1 páginas), Manual de instrucciones de instalación (8 páginas)
Imprimir página
Surface Cooking
,,
•
•
I
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Your cooktop may be equipped with any combination of the following burners:
Simmer Burner: best used for simmering delicate sauces, etc.
Standard Burner used for most all surface cooking needs.
Large Burner: best used when bringing large quantities of liquid to temperature and when
preparing larger quantities of food.
Regardless of size, always select a utensil that is suitable for the amount and type of food
being prepared. Select a bu met and flame size appropriate to the pan Never allow flames to
extend beyond the outer edge of the pan
Your cooktop is also equipped with 270 ° rotation flame control valves. These valves provide
enhanced control of the burner flame Each burner lights automatically from an electric
ignitor when its control knob is turned to the LITE position.
To operate the surface burner:
1. Place cooking utensilon burner.
2. Push in and turn the Surface Control knob to MTE Note: All electronic
ignitors will click at the same time. However, only the burner you are turning
on will ignite
3. Visually check that the burner has lit.
4. Turn the control knob to the desired flame size. The control knobs do not
have to be set at a particular mark. Use the guides and adjust the flame as
needed. DO NOT cook with the Surface Control knob in the LITE position.
(The electronic ignitor will continue to click if left in the LITE position,
causing prematurewear.)
In the event of an electrical power outage, the surface burners can be lit
manually. To light a surface burner, hold a lit match to the burner head, then
slowly turn the Surface Control knob to LITE. Use caution when lighting surface
burners manually