Atlantic LST 800W Manual de instalación y control - Página 5
Navegue en línea o descargue pdf Manual de instalación y control para Calentador Atlantic LST 800W. Atlantic LST 800W 7 páginas. Low surface temperature convector panel heaters with electronic 7 day timer
Imprimir página
9. Advance mode
Press PROG from PROG mode to bring forward the next
programme. To clear advance mode, press PROG.
10. Heat symbol on the display
Every time there is a demand for heat, the display will show the
heat icon.
- Reduced heat output when the room temperature is
close to the set temperature.
- Full heat output
1. Press and hold PROG for 5 seconds to enter the time
setting.
2. The day will be flashing.
3. Use TEMP and MODE to navigate day, press PROG to
select day.
4. PROG 1 will be flashing. Use TEMP and MODE
to navigate programme, use PROG to select
programme.
5. The minutes will be flashing.
6. To set minutes, use TEMP and MODE to change
minutes, press PROG to set the minutes.
7. The hour will be flashing
8. To set hour, use TEMP and MODE to change hour,
press PROG to set the hour.
9. The temperature will be flashing.
10. To set temperature, use TEMP and MODE
to change temperature, press PROG to set
temperature.
To add another programme repeat steps 2-10.
The LST has a 7-day timer with up to 6 programming
steps available for each day. In the programming
you can set a start time and a temperature for each
programme. Each programme has to be used.
11. Keys locking
Press and hold TIME and TEMP together for 5 seconds. The
display will show
symbol. Repeat the step to unlock.
12. Status light on the heater
Light colour Heater status
5