3M 3MDW301 Manual de instrucciones de instalación y funcionamiento - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Sistemas de filtración de agua 3M 3MDW301. 3M 3MDW301 9 páginas. Under sink water filtration
También para 3M 3MDW301: Manual de inicio rápido (2 páginas)
Imprimir página
DRINKING WATER FAUCET INSTALLATION
The following instructions assume you purchased an accessory 3M™ Drinking Water Faucet or 3M™
Designer Drinking Water Faucet with your Drinking Water System.
To reduce the risk of eye injury while drilling countertop for faucet installations:
• Safety glasses MUST be worn during the sink hole drilling operations.
•
The drinking water system faucet should be located on a flat surface, conveniently located near the sink, so that it
empties into the sink. Most sinks have pre-drilled holes designated for sprayers, soap dispensers, and other ac-
cessories. If your sink does not have an extra hole, we highly recommend professional installation.
•
Porcelain, enamel, and ceramic sinks require special procedures for drilling holes. Professional installation is
highly recommended. (See page 7)
Drilling 9/16" diameter hole through countertop or stainless steel sink:
1. Locate area to be drilled. Mark center of hole with center punch.
2. Drill hole with 9/16" drill bit suitable for countertop materials or cast iron/stainless steel.
3. With grinding wheel or file, smooth out any rough edges.
Installing the faucet:
1. Slide the following parts in the
order specified up blue tubing and
threaded stem:
a. Metal bezel
b. Large rubber washer
2. Next, feed blue tubing and faucet
stem down through faucet mount-
ing hole.
3. From underneath sink, assemble
the black spacer, star washer,
and hex nut (as shown) onto the
threaded stem and tighten by hand.
4. With a padded adjustable wrench,
turn the faucet base (above the
counter) to the right to securely
fasten. Raise faucet handle and
remove plastic shipping tube from
base.
5. Insert faucet neck onto base until
seated and align over sink. Lower
faucet handle.
CAUTION
IMPORTANT NOTES
Shipping Tube
Metal Bezel
Rubber Washer
1
Shipping Tube
Metal Bezel
Rubber Washer
Countertop
3
Plastic Backing Spacer
Star Washer
Hex Nut
4
Shipping Tube
Metal Bezel
Rubber Washer
Countertop
2
Metal Bezel
Installed
Rubber Washer
Countertop
4, 5
Plastic Backing Spacer
Star Washer
Hex Nut
Figure 1