Electrolux 922718 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Campana de ventilación Electrolux 922718. Electrolux 922718 24 páginas. Built-in hood for electric oven
También para Electrolux 922718: Manual de instalación (32 páginas)

Imprimir página

F.2.4

TiO2 Filter replacement

The hood is equipped with a TiO2 catalytic filter. It is

located inside a central technical compartment,

behind the labyrinth filter, in front of the hood.

A pop-up window appears automatically on the oven

display when cleaning or replacement is required.

Its periodic replacement is recommended at the

same time as replacing the UV-C lamps.

Remove the labyrinth filters, starting from the

middle one, raising and pulling the lower part

outwards (see F.2.1);

Open the central technical compartment by

undoing the screws fixing the cover;

Loosen the screws, move up the retaining plate;

Remove four electrical connectors (pay attention

the right position for further refit)

Remove the cassette that contain TiO2 Filter

and UVC lamps;

Looser two rear screws and remove the cassette

that contain TiO2 Filter;

Refit a new TiO2 Filter the relevant guides.

Make sure to refit them properly tightening the

rear screws;

Fixing the cover right technical compartment by

the screws;

Refit the labyrinth filters. Follow the operating

instructions in the chap F.2.1. Make sure to refit

them properly.

231007 OM_HO_04_ELUX_EN.docx -