Andrew MP2003D Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Cables y conectores Andrew MP2003D. Andrew MP2003D 9 páginas.

Imprimir página

TABLE OF CONTENTS

1.
Installation and Setting to Work .........................1
2.
Quick-Start Checklist ...........................................1
3.
Mechanical Installation ........................................1
4.
Wall Mounting .......................................................1
5.
6.
Functional Description.........................................2
7.
Cabinet Drawing ...................................................3
8.
Mechanical Specification.....................................3
9.
Environmental and Safety ...................................3
10.1.
10.2 .
10.3.
10.4 .
11. Alarming and Supervision ...................................5
11.1.
11.2.
11.3.
12. Heartbeat Setting..................................................6
13. Application ............................................................7
13.1.
13.2.
13.3.
15. List of Changes.....................................................9

1. Installation and Setting to Work

The electrical installation has to be performed in
accordance with the safety regulations of the local
authorities. Due to safety reasons the electrical
installation must be performed by qualified
personnel only. The repeater must not be opened.
The antennas of the repeater (integrated and / or
external) have to be installed in a way that the
regional and national RF exposure compliance
requirements are met.
The MR2003 is only intended for indoor
usage!
M0041AFM.doc
User's Guide MR2003B/D

2. Quick-Start Checklist

or
3
4
4
5
3.
5
6
The mechanical installation has to be done according
to the instruction in the following chapter. Mount the
unit horizontally only.
7
7
7

4. Wall Mounting

Adjust channel(s); see chapter 10.1.
Mount the repeater; see chapter 4.
Install antennas (donor and coverage antenna)
Provide the repeater with power.
Adjust the attenuation; see chapter 10.4.
Start the adjustment with the maximum attenuation
and decrease attenuation until the ALC becomes
active and the ALC alarm LED lights up. Then
increase attenuation until the ALC alarm is inactive
again.
Select 'Auto-setup'; see chapter 10.4.
Check the LEDs of the repeater; see chapter 11.

Mechanical Installation

Wall
miniRepeater
The miniRepeater may only be mounted
horizontally to a wall according to the above
drawing to ensure the natural convection
cooling. Do not mount the miniRepeater to the
ceiling!
Always choose a mounting location that
avoids condensation!
Mounting
bracket
V1550_X03